Adjust Front Alignment
Included Operations
|
•
|
Position vehicle on alignment rack and check/adjust tire pressure |
|
•
|
Check ride height and adjust to vehicle manufacturer specifications |
|
•
|
Set-up gauges on all 4 wheels and check wheel run out and front suspension for wear |
|
•
|
Determine vehicle tracking by checking thrust angle to vehicle center line |
|
•
|
Adjust front caster, camber and toe-in where applicable |
|
•
|
Perform vehicle manufacturer recommended shimming procedures if necessary |
|
•
|
Remove vehicle from alignment equipment |
|
•
|
Verify alignment by road test |
Not Included Operations
|
•
|
Diagnostic road test to determine if alignment operations are necessary |
|
•
|
Straighten or replace suspension parts and/or structural components |
|
•
|
Shift or align engine subframe/crossmember and/or axle housing |
|
•
|
Remove and install steering wheel |
|
•
|
Non-vehicle manufacturer shimming |
|
•
|
Adjust rear wheel alignment |
NOTE: Labor times for Wheel Alignment are based on the use of Four Wheel Alignment equipment to ensure that a minimum Thrust Angle Alignment is provided in all instances where a Four Wheel Alignment cannot be performed. If other than Four Wheel Alignment equipment is used, some adjustment in labor times may be appropriate.